Garden office interiors

There’s a lot of focus on the exterior appearance of a garden office, but you are likely to spend the bulk of your time inside, so you should give as much thought to the internal finish.

There are a number of different finishes used for the interior of garden offices these days, some are pared down industrial looks, others create a room just like that in your house.

Your budget, the garden office building system and the style of the building will all play a part in your number of options.

The most common garden office interiors are a vinyl coated board which creates a neutral finish and is easy to maintain, and a fully plastered interior which will create a space like any room in your house. There are lots of other options too, lets take a closer look:

Wall boards

Wall panels often have strips to neatly cover the joints - some people feel this divides the wall space, but they are very discreet

Wall panels often have strips to neatly cover the joints – some people feel this divides the wall space, but they are very discreet

One of the most popular internal finishes for garden offices is wall boards, they are commonly used on modular garden office designs.

The boards come in large sheets 1.2m (4ft) wide which makes them ideal for use in modular designs as this is a standard panel size, so is a cost effective option.

Wall boards are typically made up of a thin plywood base onto which different finishes are applied, such as a coloured papered finish or a thin vinyl finish which has a soft sheen and is wipe clean. This type of wall board is often used in caravans so you may be familiar with the finish.

Wall boards are normally neutral in colour – white, cream or beige so they create a blank canvas for you to make your mark in the room. Because they are components of a modular building system the joints of the boards have a plastic strip cover, this is a neat finish and the strips are normally a close colour match to the wall board, some people do feel however that they divide the wall space up.

There are also waterproof wall board systems which can be used in a shower room or kitchen area, we will look at these in more detail below.

Back to article index

Tongue & groove boards

Garden-office-internal-finishes---tongue-&-groove-01Tongue & groove boards where a common and popular option in the early days of garden office design, and are still an option on traditional style designs.

T&G paneling is normally painted and creates a room that has a very soft feel and a ‘Shaker’ style look.

There are two ways of creating this finish, the most common option is to use lengths of softwood which has been machined to create the tongue and groove joint, boards are normally fixed vertically and the ‘v’ groove between the boards creates a subtle yet decorative element. This joint can be accentuated by opting for a board that has a bead shaped decal alongside the ‘v’ groove.

Check the specification to see how the boards are finished, some suppliers leave the boards bare, with the grain and knots visible, others prime and paint the boards for a complete finish.

The other way of creating this finish is to use MDF sheets which have had the tongue and groove effect machined into the face of the sheet. This is a very quick way to panel the room as the sheets are large and easy to fix.

MDF sheets like this take paint finishes very well, and once painted you wouldn’t know the walls weren’t finished in individual tongue & groove boards.

Back to article index

Dry lined walls

Many garden office buyers want to create a room that has the feel of a room in the house, so are looking for a plasterboard finish. This is done in two ways / levels by garden office suppliers – dry lining or fully plastered. We’ll talk about the fully plastered option in the section below.

When dry lining is specified on a garden office specification, the supplier will line the walls and ceiling of the building with plasterboard sheets, the joints will be taped and filled and any fixings filled in, this finish is then ready for painting, which most suppliers will include in the project cost.

Back to article index

Fully plastered walls

Fully plastered garden offices are just like a room in your house

Fully plastered garden offices are just like a room in your house

This is the ultimate finish if you want to create a interior that’s like a conventional room.

The walls are lined with plasterboard as described in the dry lining section above, the boards are then coated with plaster and polished to create a smooth, high quality interior.

Once the plaster has dried out fully it is ready to take paint, again the suppliers will normally apply this for you as part of your project cost.

Back to article index

Waterproof boards

With the growth of shower rooms and kitchens being incorporated into garden office designs, a way of water proofing such areas is important. Particularly because garden offices are of timber construction so you don’t want water penetrating into the core of the building.

Tiling is obviously an option, but waterproof wall boards are proving a very popular. These boards come in large sheets with various decorative finishes and can become part of the wall structure. Because they are supplied in large sheets there are few joints, so minimal places for water to escape into the structure.

Water proof wall boards come in a wide range of finishes from plain white, to marble effects to boards that look like walls of tiles.

Back to article index

Plywood

A pared down look can be created using plywood sheets

A pared down look can be created using plywood sheets

Plywood is a popular option for both pared down look interiors and industrial style interiors. The large sheets are often used on the walls, floor and ceiling of the room creating a very simple finish.

The choice of plywood used has an effect on the final appearance of the room. High spec plywood with birch veneer, oiled to give a soft sheen is a popular option as it creates a light interior. Lower grade plywood’s with imperfections in the face of the sheet is popular in more industrial designs, where the room is designed to have a back to basics feel.

Plywood finishes are again popular in modular building systems because they can form part of the wall structure creating buildings which are quick to assemble.

Back to article index

MDF

MDF is often specified on budget garden office designs. It comes in large sheets and has a structural quality so often forms the inner skin of structural insulated panel make-ups.

Because MDF comes in 1.2m (4ft) wide sheets it is ideal for use in modular construction garden offices where this is a common section size.

MDF has a smooth surface and takes paint well, so a conventional painted room can easily be created.

Check the specification list to see if the supplier paints the MDF for you, we have seen it left bare for the customer to paint on several specifications.

Back to article index

Paneling

Panelling can either be a wood grain or a high gloss coloured panel

Paneling can either be a wood grain or a high gloss coloured panel

Paneled wall finishes are option on bespoke garden office designs, we’re not talking heavy paneling like you might find in the library of a stately home, although this would be possible, but contemporary style paneling.

The contemporary paneling used in garden office design is normally small rectangles – say 600mm x 900mm with a small shadow gab between each panel. The panels themselves are normally smooth.

Some suppliers offer high gloss paneling which bounces light around the room, whilst others use veneered wood panels which have attractive grain patterns.

The whole interior can be finished in this style of paneling or it can be mixed with a plastered interior to create a feature wall.

Back to article index

Make your mark on your garden office walls

You could make a statement with a feature wall

You could make a statement with a feature wall

Of course you are not limited to these standard finishes, and a garden office is a blank canvas to make your own mark on the space.

Some quirky garden office interiors have been created with feature walls of wallpaper, others have had a city scape enlarged onto one wall which makes a huge statement.

There are paints available with allow you to create walls which can be used as blackboards or wipe boards, which could be very useful for mind mapping work in a garden office.

We’ve seen examples where the owner wanted to create a loft style office space and have had walls finished brick slips which give the appearance of aged brick walls.

So, there is no reason to have four plain walls in your office, what will you do with yours?

Back to article index